Heater, 450W, 120V
$229.06Heater, 450 Watt, 120 Volt with ground wire
Showing 65–80 of 154 results
-
-
-
-
-
Horizontal Air Gap, 2″
$1,080.00The Big Dipper HAG-2 Horizontal Air Gap Assembly Kit offers a simple yet effective method for providing an air gap for meeting health department or plumbing code requirements. Among the many different methods of creating an air gap to protect against cross-contamination, the most popular is an air gap directly between the sink discharge and the outflow piping. In the event of a backup, effluent will spill out of this gap under the sink and directly onto the floor without any danger of cross-contamination.
-
3″ Horizontal Air Gap for Grease Trap Drain Lines | Big Dipper
$1,112.00The Big Dipper HAG-3 Horizontal Air Gap Assembly Kit offers a simple yet effective method for providing an air gap for meeting health department or plumbing code requirements. Among the many different methods of creating an air gap to protect against cross-contamination, the most popular is an air gap directly between the sink discharge and the outflow piping. In the event of a backup, effluent will spill out of this gap under the sink and directly onto the floor without any danger of cross-contamination.
-
Indicator Light for 14000 Series Big Dipper
$54.53Indicates when there is power coming to the unit. If ILA is not illuminated, either there is no power coming from the receptacle, there is an issue with the power cord for the Big Dipper, or the ILA needs to be replaced.
-
IMLEA Adapter Kit for Replacement on 51000 Series Big Dipper
$54.85IMLEA Adapter Kit for Replacement on 51000 Series Big Dipper
-
IMLEA Lid Replacement for 51000 Series
$92.72*Units that ship may be dark or light gray
IMLEA lid replacement for 51000 Series
-
-
LD-200 Big Dipper Passive Grease Trap
$1,506.00The Big Dipper Passive (formerly Little Dipper) LD-200 Hydromechanical Grease Interceptor is rated to the ASME A112.14.3 standard and is capable of accepting up to a 20 GPM (1.26 l/s) flow while holding 47.1 lbs. (21.4 kg) of grease.- Constructed of corrosion resistant materials suitable for installation in virtually any location. Attractive sanitary Stainless Steel exterior.
- Compact footprint.
- Two (2) No-Hub Connectors provided.
- Note: This product is non-stock and non-returnable
-
LD-250 Big Dipper Passive Grease Trap
$1,785.00The Big Dipper Passive (formerly Little Dipper) LD-250 Hydromechanical Grease Interceptor is rated to the ASME A112.14.3 standard and is capable of accepting up to a 25 GPM (1.6 l/s) flow while holding 56.4 Pounds (25.6 Kg) of grease.- Constructed of corrosion resistant materials suitable for installation in virtually any location. Attractive sanitary Stainless Steel exterior.
- Compact footprint.
- Two (2) No-Hub Connectors provided.
- Note: This product is non-stock and non-returnable
-
LD-350 Big Dipper Passive Grease Trap
$2,179.00The Big Dipper Passive (formerly Little Dipper) LD-350 Hydromechanical Grease Interceptor is rated to the ASME A112.14.3 standard and is capable of accepting up to a 35 GPM (2.21 l/s) flow while holding 70+ Pounds (31.8+ Kg) of grease.- Constructed of corrosion resistant materials suitable for installation in virtually any location. Attractive sanitary Stainless Steel exterior.
- Compact footprint.
- Two (2) No-Hub Connectors provided.
- Note: This product is non-stock and non-returnable
-
LD-500 Big Dipper Passive Grease Trap
$2,614.00The Big Dipper Passive (formerly Little Dipper) LD-500 Hydromechanical Grease Interceptor is rated to the ASME A112.14.3 standard and is capable of accepting up to a 50 GPM (3.15 l/s) flow while holding 100+ Pounds (45.4+ Kg) of grease.- Constructed of corrosion resistant materials suitable for installation in virtually any location. Attractive sanitary Stainless Steel exterior.
- Compact footprint.
- Two (2) No-Hub Connectors provided.
- Note: This product is non-stock and non-returnable
-
LD-750 Big Dipper Passive Grease Trap
$4,819.00The Big Dipper Passive (formerly Little Dipper) LD-750 Hydromechanical Grease Interceptor is rated to the ASME A112.14.3 standard and is capable of accepting up to a 75 GPM (4.73 l/s) flow while holding 160+ Pounds (76.63+ Kg) of grease.- Constructed of corrosion resistant materials suitable for installation in virtually any location. Attractive sanitary Stainless Steel exterior.
- Compact footprint.
- Two (2) No-Hub Connectors provided.
- Note: This product is non-stock and non-returnable
-
