Showing 49–64 of 155 results
For 2000 series units and older.
This flow control is trimmed after ordering to ensure the correct GPM. Select the flow control that corresponds to the flow rate of the Big Dipper.
This part is for units sized at 100 GPM (W-1000-IS).
For 20 GPM (W-200-IS) units, select FCR-1-20.
For 25 GPM (W-250-IS) units, select FCR-1-25.
For 35 GPM (W-350-IS) units, select FCR-1-35.
For 50 GPM (W-500-IS) units, select FCR-1-50.
For 75 GPM (W-75-IS) units, select FCR-1-75.
For 2000 series units and older.
This flow control is trimmed after ordering to ensure the correct GPM. Select the flow control that corresponds to the flow rate of the Big Dipper.
This part is for units sized at 20 GPM (W-200-IS).
For 25 GPM (W-250-IS) units, select FCR-1-25.
For 35 GPM (W-350-IS) units, select FCR-1-35.
For 50 GPM (W-500-IS) units, select FCR-1-50.
For 75 GPM (W-750-IS) units, select FCR-1-75.
For 100 GPM (W-1000-IS) units, select FCR-1-100.
For 2000 series units and older.
This flow control is trimmed after ordering to ensure the correct GPM. Select the flow control that corresponds to the flow rate of the Big Dipper.
This part is for units sized at 25 GPM (W-250-IS).
For 20 GPM (W-200-IS) units, select FCR-1-20.
For 35 GPM (W-350-IS) units, select FCR-1-35.
For 50 GPM (W-500-IS) units, select FCR-1-50.
For 75 GPM (W-750-IS) units, select FCR-1-75.
For 100 GPM (W-1000-IS) units, select FCR-1-100.
For 2000 series units and older.
This flow control is trimmed after ordering to ensure the correct GPM. Select the flow control that corresponds to the flow rate of the Big Dipper.
This part is for units sized at 35 GPM (W-350-IS).
For 20 GPM (W-200-IS) units, select FCR-1-20.
For 25 GPM (W-250-IS) units, select FCR-1-25.
For 50 GPM (W-500-IS) units, select FCR-1-50.
For 75 GPM (W-750-IS) units, select FCR-1-75.
For 100 GPM (W-1000-IS) units, select FCR-1-100.
For 2000 series units and older.
This flow control is trimmed after ordering to ensure the correct GPM. Select the flow control that corresponds to the flow rate of the Big Dipper.
This part is for units sized at 50 GPM (W-500-IS).
For 20 GPM (W-200-IS) units, select FCR-1-20.
For 25 GPM (W-250-IS) units, select FCR-1-25.
For 35 GPM (W-350-IS) units, select FCR-1-35.
For 75 GPM (W-750-IS) units, select FCR-1-75.
For 100 GPM (W-1000-IS) units, select FCR-1-100.
For 2000 series units and older.
This flow control is trimmed after ordering to ensure the correct GPM. Select the flow control that corresponds to the flow rate of the Big Dipper.
This part is for units sized at 75 GPM (W-750-IS).
For 20 GPM (W-200-IS) units, select FCR-1-20.
For 25 GPM (W-250-IS) units, select FCR-1-25.
For 35 GPM (W-350-IS) units, select FCR-1-35.
For 50 GPM (W-500-IS) units, select FCR-1-50.
For 100 GPM (W-1000-IS) units, select FCR-1-100.
Front Electrical Enclosure Assembly for Big Dipper Center Module Series 8000, 14000. **Formally listed as FEE-1**
Front Electrical Enclosure for Big Dipper Center Module Series 40000. **Does not have Pilot Light Tube found on as FEEA-14** (May also be listed as FEEDA-1)
Grease collector seal for 51000 series Big Dipper unit
Grease Container for use with W-1250-IS and W-1250-AST models (will not work with any W-150-IS Model or W-200-IS Models manufactured prior to May 2010)
Grease Collector, Graduated, Translucent
For Big Dipper units, series 51000.
Replaces GC-10
Grease Sensor Heater 115 Volt Assembly **Previously listed as ASSEM-GSH-115**
Heater assembly, 115V, 1100 Watts
Qualifies for free shipping
Heater assembly, 230V, 1100 Watts
To be used with W-1000-IS 51000 series units.
