75 GPM Vented Flow Control Assembly

$109.20

The Big Dipper 75 GPM Vented Flow Control Assembly VFCA-75 is an accessory listed for 5000, 6000, 8000, 14000, 21000, 40000 and 51000 Series Big Dipper units and Trapzilla grease interceptors.

The Vented Flow Control Assembly is an important component for Big Dipper and Trapzilla installations with significant head pressure. It keeps flow from exceeding 75 GPM, protecting the unit’s separation performance.

Sometimes space restrictions require the installation of Big Dipper and Trapzilla units in basement locations where significant head pressure becomes a factor.  The VFCA-75 Vented Flow Control module provides an option for use with installations where significant head pressure is present (greater than 6′ [1.95 m]) or where applicable regulations require vented flow controls.  The Vented Flow Control helps reduce problems associated with high head pressure and helps slow the drainwater flow down the pipe, preventing it from exceeding 75 gallons per minute (4.73 l/s).  Includes appropriate PVC fitting and flow stainless steel flow control orifice.

  • Part number: VFCA-75
  • Listed for: 5000, 6000, 8000, 14000, 21000, 40000 and 51000 Series Big Dipper
  • Type: Accessory

Not sure which series you have? Find your Big Dipper series on DipperHelp.com or call 800-633-4204.

Description

Big Dipper 75 GPM Vented Flow Control Assembly VFCA-75

The Vented Flow Control Assembly is an important component for Big Dipper and Trapzilla installations with significant head pressure. It keeps flow from exceeding 75 GPM, protecting the unit’s separation performance.

  • Includes PVC fitting (4″) and Stainless Steel Control Orifice
  • Designed to prevent flows from exceeding 75 gallons per minute (4.73 l/s)
  • Must be installed as close as possible to level at which kitchen fixtures are located
  • Air Intake (2″) may be independent direct connect to atmosphere or code-approved air addmittance valve
  • Use of VFCA requires removal of MFC Flow Control (small rubber cap) from Inlet of Big Dipper or Low Head Flow Control from Trapzilla
  • Never connect to facility vent

Listed For

  • 5000 Series Big Dipper
  • 6000 Series Big Dipper
  • 8000 Series Big Dipper
  • 14000 Series Big Dipper
  • 21000 Series Big Dipper
  • 40000 Series Big Dipper
  • 51000 Series Big Dipper
  • Trapzilla grease interceptors

Specifications

Part Number VFCA-75
Product Type Accessory
Flow Rate 75 GPM
Listed for Series 5000, 6000, 8000, 14000, 21000, 40000 and 51000
Shipping Weight 3 lbs

Alternative Part Numbers

Part may also be listed as VFCA75 or VFCA 75.

Additional information

Weight 3 lbs
Dimensions 8 × 8 × 5 in

Documents

Reviews

There are no reviews yet.

Be the first to review “75 GPM Vented Flow Control Assembly”

Your email address will not be published. Required fields are marked *