35 GPM Vented Flow Control Assembly
$72.45
The Big Dipper 35 GPM Vented Flow Control Assembly VFCA-35 is an accessory listed for 5000, 6000, 8000, 14000, 21000, 40000 and 51000 Series Big Dipper units and Trapzilla grease interceptors.
The Vented Flow Control Assembly is an important component for Big Dipper and Trapzilla installations with significant head pressure. It keeps flow from exceeding 35 GPM, protecting the unit’s separation performance.
Sometimes space restrictions require the installation of Big Dipper and Trapzilla units in basement locations where significant head pressure becomes a factor. The VFCA-35 Vented Flow Control module provides an option for use with installations where significant head pressure is present (greater than 6′ [1.95 m]) or where applicable regulations require vented flow controls. The Vented Flow Control helps reduce problems associated with high head pressure and helps slow the drainwater flow down the pipe, preventing it from exceeding 35 gallons per minute (2.21 l/s). Includes appropriate PVC fitting and flow stainless steel flow control orifice.
- Part number: VFCA-35
- Listed for: 5000, 6000, 8000, 14000, 21000, 40000 and 51000 Series Big Dipper
- Type: Accessory
Not sure which series you have? Find your Big Dipper series on DipperHelp.com or call 800-633-4204.
Description
Big Dipper 35 GPM Vented Flow Control Assembly VFCA-35
The Vented Flow Control Assembly is an important component for Big Dipper and Trapzilla installations with significant head pressure. It keeps flow from exceeding 35 GPM, protecting the unit’s separation performance.
- Includes PVC fitting (3″) and Stainless Steel Control Orifice
- Designed to prevent flows from exceeding 35 gallons per minute (2.21 l/s)
- Must be installed as close as possible to level at which kitchen fixtures are located
- Air Intake (1 1/2″) may be independent direct connect to atmosphere or code-approved air admittance valve
- Use of VFCA requires removal of MFC Flow Control (small rubber cap) from Inlet of Big Dipper or Low Head Flow Control from Trapzilla
- Never connect to facility vent
Listed For
- 5000 Series Big Dipper
- 6000 Series Big Dipper
- 8000 Series Big Dipper
- 14000 Series Big Dipper
- 21000 Series Big Dipper
- 40000 Series Big Dipper
- 51000 Series Big Dipper
- Trapzilla grease interceptors
Specifications
| Part Number | VFCA-35 |
| Product Type | Accessory |
| Flow Rate | 35 GPM |
| Listed for Series | 5000, 6000, 8000, 14000, 21000, 40000 and 51000 |
| Shipping Weight | 2 lbs |
Alternative Part Numbers
Part may also be listed as VFCA35 or VFCA 35.
Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 7 × 5 × 5 in |





Reviews
There are no reviews yet.