W-750-AST Automatic Grease Removal Device
New product coming soon!
In order to make it easier to protect sewer systems from grease, we have been working on improving our Big Dipper AST model. Now featuring Advanced Odor Protection, the new Big Dipper AST will be easier to install and maintain.
- Fully automatic self cleaning cycle. Removes collected grease & oils from tank without any operator assistance. Comes complete with digital control interface and Grease Collector.
- Constructed of corrosion resistant materials suitable for installation in virtually any location. Attractive sanitary Stainless Steel exterior.
- Integrated Motor/Grease Outlet/Heater/Lid enables a fast, do-it-yourself unit operation reversal.
- Compact footprint.
- Two (2) No-Hub Connectors provided.
Exterior: 304 Stainless Steel, Bright Finish
Interior: Rotationally Molded Polyethylene
Electrical: 115 VAC, 60 Hz, 535 Watts (4.6 Amps)*
Maximum Inlet Flow Rate: 75 GPM (4.73 l/s)
Number of Skimming Wheels: 1
Skimming Rate: 20 Pounds Per Hour (9.08 Kg Per Hour)
Grease Retention Capacity: 150+ Pounds (68+ Kg)
Eductor Pump Operation Water Requirements: 50 PSI min., 12 GPM (3.45 BAR min., 0.75 l/s)
Thermaco Big Dipper Model No. W-750-AST, bright finish type 304 stainless steel exterior, rotationally molded polyethylene interior automatic self-cleaning grease and oil recovery separator(s) for floor mounted or partially recessed installation, rated at 75 gallons per minute (4.73 l/s) peak flow, 150 pounds (68 Kg) of grease capacity and including as an integral part of the unit, 1 rotating gear hydrophobic wheel assembly for automatic grease/oil removal, an integral flow control device, self-regulating enclosed electric immersion heater, a vessel vent, an integral gas trap, an integral programmable 24-hour multi-event time control, a field reversible motor location, a field reversible grease/oil sump outlet, quick release stainless steel lid clamps, a gasketted and fully removable 304 stainless steel lid, lift-out filter basket access, an eductor transfer pump controlled by repeat cycle timer, and a separate grease and oils collection container. Eductor pump shall be supplied with a 0.5” female connector for attachment to facility- supplied water supply. Eductor pump shall be supplied with an approved vacuum breaker. Electric assembly shall be tested to comply with pertinent sections of the Standards for Safety ANSI/UL 73 and/or ANSI/UL 1004. Electric motor equipped with overload protection.
W-750-AST: 115V 50/60Hz, 535 Watts (4.6 Amps)
W-750-AST-E: 230V 50/60Hz, 535 Watts (2.3 Amps)
Unit may be improperly listed as W750AST, W-750AST, W750-AST, W-750, W750, 750-AST or 750AST